優秀員工英文自我評價及翻譯

2024-09-09 自我評價

　　在學習、工作或生活中，我們都嘗試過寫自我評價吧，自我評價往往折射出個人對人生自我價值和社會價值的認識和態度。那要怎么寫好自我評價呢？下面是小編幫大家整理的優秀員工英文自我評價及翻譯，歡迎大家分享。

　　優秀員工英文自我評價及翻譯 1

　　Under the guidance of my patients patience and the strong support of the company, I completed the work of the company basically and effectively in the year. At the same time, I contacted and learned a lot of things in this process, and applied it to work, and the efficiency of work increased much more than that of last year. The key work of the year is identified as follows:

　　first、Sample production

　　The sample production number of 793 sets is 20.3% higher than that of last year, but the problem of appearance quality still has not been solved fundamentally. It has not achieved good results, and the success rate of the sample is low. Although the shortage of model materials is not a major obstacle to model making, it is the main factor that the number of samples did not finish this year accounted for 15.6% of the total number of samples. There is a difference between sample material and production order, which is still not an issue. Seal sample management is still a loophole. There is no effective measure to control the loss of seal samples. This is a major drawback of the years sample matters.

　　Second、the coordination of daily production quality

　　Although a lot of work has been done in the quality control of the daily workshop, there are still many problems, which make the customer complaints reach 21 times this year. New customers, new process requirements and good communication with workshop. Although the process of communication and cooperation with the procurement department is relatively smooth, it is very passive, and the source of procurement information is not enough, resulting in no price competitiveness.

　　Third、 the settlement and response of customer complaints

　　In this year, with growth in shipments and strict quality requirements, the number of customer complaints to reduce 2 times 21 times *. Among them, the problem of Xishi is the biggest quality problem of the year. Other small problems can effectively solve and reply guests. But in the process of solving these problems, I directly reflected the following points: communication methods are not scientific enough, the dynamics of tracking problems are not enough; the coordination degree of the relevant departments of the company is not enough, and often delayed.

　　Fourth、assist new product development, product and objective performance testing.

　　In assisting the tracking and testing of new product development, I and engineering staff can almost finish the project delivered by the technology department on time. Due to the inaccuracy of the standard technical instructions and equipment, the main reasons for the shortage of the engineering department are lacking. Looking at the annual work of the * * * and looking forward to the new year, I strive to do the following in 20XX.

　　1, the effective and timely completion rate of sample work is 90%, and the accuracy rate of product testing is 98%.

　　2, 1-5 month please assist Technology Department inspection technology refers to a set of standard.

　　3, strive to complete the specification and shorten standardization of all pot inner line length in mid April.

　　4, we should strengthen the quality and vigorously excavate the cost from material aspect.

　　翻譯：

　　在我部耐心的指引和公司的大力支持下，本人于年度基本有效地完成了公司交予的工作任務，同時在這過程里本人接觸和學習了不少東西，并應用于工作中，工作效益比去年增長了許多�，F就本年度重要工作鑒定以下：

　　一、樣板制作

　　樣板制作數量為793臺比去年增長了20.3%，但外觀質量問題仍然沒有從根本上解決，沒有達到較好的效果，樣品奪單的成功率較低。樣板物料的短缺雖然不是樣板制作的重要障礙，卻是本年樣品沒有完成次數占樣品單總次數15.6%的主要因素。樣品用料和生產定單用料時有不一致，這問題仍然未杜絕。封樣管理還是一個漏洞，沒有一個有效的措施去控制封樣的流失是本年度樣板事項的重大不足。

　　二、日常生產質量的協調

　　在日常生產車間的質量控制雖然做了大量的工作，但仍出了不少問題，使得本年度客戶投訴達到了21次之多。新客戶，新工藝的要求與車間溝通做得良好的配合。在與采購部溝通合作的過程雖然還比較順利，但很被動，采購信息來源不夠，造成沒有物價競爭力。

　　三、客戶投訴的解決與回復

　　在今年隨著出貨量的增長和質量要求的加嚴后，客戶投訴的次數達到21次比****年減少2次。其中西施之問題是本年度最大的質量問題，其他雖大雖小的問題都能有效去解決與回復了客人。但本人在解決這些問題過程中直接體現了以下幾點：溝通方法還不夠科學，跟蹤問題的力度不夠;公司有關部門的配合程度還不夠，時常被拖遲時間。

　　四、協助新產品的開發和產品及客觀性能測試。

　　在協助新產品開發的跟蹤及測試，本人及工程部的人員幾乎都能按時完成技術部交予的`工程。由于沒有正確標準的技術指導書及設備的不精密，使得工程部在本工作不足的主要因素。觀上****年度的工作情況，展望新的一年，本人力爭20xx年度做好以下之：

　　1、樣品工作有效及時地完成率要達90%，產品檢測與標準一致的準確率達98%。

　　2、1-5月份請技術部協助完成一套標準的檢驗技術指書。

　　3、力爭4月中旬完成對所有鍋類內線長度的規范和縮短標準化。

　　4、加強質量的力度，同時大力從材料方面去挖掘降低成本。

　　優秀員工英文自我評價及翻譯 2

　　Good command of computer skills：familiar with different versions of Windows OS and Office application software，obtained some experience and understanding about other widely-used software like Photoshop and Dreamwaver。

　　具有良好的計算機技能，熟悉各類WINDOWs操作系統以及office系列辦公軟件，對于photoshop和dreamwaver也有一定的了解和使用經驗。

　　突出專業知識：

　　順利完成專業課程學習，熟練掌握專業理論知識和實驗技能，具有很強的動手能力，善于學習新知識和適應新環境。英語口語流利，具有良好的英語閱讀、寫作能力；普通話標準。

　　Completed all the courses in the specialized field, obtaining good command of theoretic knowledge and experimental and DIY skill; Very adaptable and Good at leaning.Fluent in oral English , with fairly good of reading and writing ability; Speaking authentic Mandarin-Chinese.

　　突出技能要求：

　　具有良好的.計算機技能，熟悉各類Windows操作系統以及Office系列辦公軟件，可使用C語言和FORTRAN語言進行編程，對于AUTOCAD、PHOTOSHOP、 CORELDRAW 、DREAMWAVER也有一定的了解和使用經驗。

　　Good command of Computer skills: familiar with different versions of Windows OS and Office application software, able to program with C and Fortran languages, obtained some experience and understanding about other widely-used software like Autocad, Photoshop, Coreldraw and Dreamweaver.

　　突出性格能力：

　　有很強的領悟力和理解力，思維開闊、敏捷，能夠很快適應不同環境。

　　勤奮，踏實，有責任心，對自己的工作盡職盡責。

　　思想活躍、創新與變格精神尤佳。

　　做事認真、專注，有計劃、有條理，較強的分析能力，追求完美。

　　形象良好，性格溫和、穩重，親和力強，善于與人相處。

　　有耐心，對壓力和挫折有承受力。

　　Strong perception & intellect; with widen and swift thinking; able to be quickly adapted to different environmenet.

　　Diligent; with sureness; responsible; everytime fulfil my duties to my own work.

　　Being active; creative and innonative is a plus.

　　Conscientiously, absorbedly work in a planned and order way; with good analytical capability, pursue the perfection.

　　Good image; temperate, calm and steady personality; strong affinity; good at getting along with people.

　　Patient; have holding capacity to pressure and setback.

相關推薦

【優秀員工英文自我評價及翻譯】相關文章：

英文自我評價11-04