當我們去外資企業面試的時候，我們一定要掌握用英語自我介紹的方法。接下來小編整理了外企面試自我介紹方法，歡迎大家閱讀。
外企面試自我介紹方法
1、一分鐘談一項內容
自我介紹的時間一般為3分鐘，在時間的分配上，第一分鐘可談談學歷等個人基本情況，第二分鐘可談談工作經歷，對于應屆畢業生而言可談相關的社會實踐，第三分鐘可談對本職位的理想和對于本行業的看法。如果自我介紹要求在1分鐘內完成，自我介紹就要有所側重，突出一點，不及其余。
在實踐中，有些應聘者不了解面試自我介紹的重要性，只是簡短地介紹一下自己的姓名、身份，其后補充一些有關自己的學歷、工作經歷等情況，大約半分鐘左右就結束了自我介紹，然后望著考官，等待下面的提問，這是相當不妥的，白白浪費了一次向面試官推薦自己的寶貴機會。而另一些應聘者則試圖將自己的全部經歷都壓縮在這幾分鐘內，這也是不明智的做法。合理地安排自我介紹的時間，突出重點是首先要考慮的`問題。
2、切勿采用“背誦”口吻
人力資源專家指出，自我介紹可以事前準備，也可以事前找些朋友做練習，但自我介紹應避免書面語言的嚴整與拘束，而應使用靈活的口頭語進行組織。切忌以背誦朗讀的口吻介紹自己，如果那樣的話，對面試官來說，將是無法忍受的。自我介紹還要注意聲線，盡量讓聲調聽來流暢自然，充滿自信。
3、只說與職位相關的優點
自我介紹時要投其所好擺成績，這些成績必須與現在應聘公司的業務性質有關。在面試中，你不僅要告訴考官你是多么優秀的人，更要告訴考官，你如何地適合這個工作崗位。那些與面試無關的內容，即使是你引以為榮的優點和長處，你也要忍痛舍棄。
在介紹成績時，說的次序也極為重要，應該把你最想讓面試官知道的事情放在前面，這樣的事情往往是你的得意之作，也可以讓面試官留下深刻的印象。
4、以說真話為前提
面試自我介紹時，要突出個人的優點和特長，你可以使用一些小技巧，比如可以介紹自己做過什么項目來驗證具有某種能力，也可以適當引用別人的言論，如老師、朋友等的評論來支持自己的描述。但無論使用哪種小技巧，都要堅持以事實說話，少用虛詞、感嘆詞之類。自吹自擂一般是很難逃過面試官的眼睛的。至于談弱點時則要表現得坦然、樂觀、自信。
外企面試英語自我介紹范文
I am a third year master major in automation at Shanghai Jiao Tong University, P. R. China. With tremendous interest in Industrial Engineering, I am writing to apply for acceptance into your Ph.D. graduate program.
In 19xx, I entered the Nanjing University of Science & Technology (NUST) -- widely considered one of the China’s best engineering schools. During the following undergraduate study, my academic records kept distinguished among the whole department. I was granted First Class Prize every semester, and my overall GPA(89.5/100) ranked No.1 among 113 students. In 19xx, I got the privilege to enter the graduate program waived of the admission test. I selected the Shanghai Jiao Tong University to continue my study for its best reputation on Combinatorial Optimization and Network Scheduling where my research interest lies.
At the period of my graduate study, my overall GPA(3.77/4.0) ranked top 5% in the department. In the second semester, I became teacher assistant that is given to talented and matured students only. This year, I won the Acer Scholarship as the one and only candidate in my department, which is the ultimate accolade for distinguished students endowed by my university. Presently, I am preparing my graduation thesis and trying for the honor of Excellent Graduation Thesis.
Research experience and academic activity，When a sophomore, I joined the Association of AI Enthusiast and began to narrow down my interest for my future research. In 19xx, I participated in simulation tool development for the scheduling system in Prof. Wang’s lab. With the tool of OpenGL and Matlab, I designed a simulation program for transportation scheduling system. It is now widely used by different research groups in NUST. In 1998, I assumed and fulfilled a sewage analysis & dispose project for Nanjing sewage treatment plant. This was my first practice to convert a laboratory idea to a commercial product.
In 19xx, I joined the distinguished Professor Yu-Geng Xis research group aiming at Network flow problem solving and Heuristic algorithm research. Soon I was engaged in the FuDan Gene Database Design. My duty was to pick up the useful information among different kinds of gene matching format. Through the comparison and analysis for many heuristic algorithms, I introduced an improved evolutionary algorithm -- Multi-population Genetic Algorithm. By dividing a whole population into several sub-populations, this improved algorithm can effectively prevent GA from local convergence and promote various evolutionary orientations. It proved more efficiently than SGA in experiments, too. In the second semester, I joined the workshop-scheduling research in Shanghai Heavy Duty Tyre plant. The scheduling was designed for the rubber-making process that covered not only discrete but also continuous circumstances. To make a balance point between optimization quality and time cost, I proposed a Dynamic Layered Scheduling method based on hybrid Petri Nets. The practical application showed that the average makespan was shortened by a large scale. I also publicized two papers in core journals with this idea. Recently, I am doing research in the Composite Predict of the Electrical Power system assisted with the technology of Data Mining for Bao Steel. I try to combine the Decision Tree with Receding Optimization to provide a new solution for the Composite Predictive Problem. This project is now under construction.
Besides, In July 20xx, I got the opportunity to give a lecture in English in Asia Control Conference (ASCC) which is one of the top-level conferences among the world in the area of control and automation. In my senior year, I met Prof.Xiao-Song Lin, a visiting professor of mathematics from University of California-Riverside, I learned graph theory from him for my network research. These experiences all rapidly expanded my knowledge of English and the understanding of western culture.
I hope to study in depth .In retrospect, I find myself standing on a solid basis in both theory and experience, which has prepared me for the Ph.D. program. My future research interests include: Network Scheduling Problem, Heuristic Algorithm research (especially in GA and Neural network), Supply chain network research, Hybrid system performance analysis with Petri nets and Data Mining.
Please give my application materials a serious consideration. Thank you very much.
